As a homeowner, experiencing plumbing problems is something that cannot be avoided. Although some of these issues may arise from wear and tear on fixtures over time or from general usage of plumbing equipment, others may be due to improper usage and maintenance of specific systems.

Diamond Plumbing has the expertise to assist you with common and unusual plumbing problems. They can offer solutions to some of the most frequently occurring issues, along with explanations as to why these issues happen and potential remedies for them.

1: Annoying Leaking Faucets

The constantly leaking faucet can be bothersome, wasteful, and expensive. The cause of these drips may be due to a worn-out washer or O ring, which can be readily replaced. However, this plumbing issue may also stem from corrosion or improper installation of the faucet.

  • Utilize a drip calculator to estimate the potential cost of the drip.
  • Seek assistance from professional plumbers to diagnose the issue if a basic replacement of a washer or O ring does not resolve the problem.
leaky faucet problem

Fix Your Leaky Faucets

  1. Turn off the water supply to the faucet.
  2. Remove the handle and the nut beneath it.
  3. Take out the old washer or O-ring and replace it with a new one.
  4. Reassemble the faucet, turn on the water supply, and test for leaks.

If the leak persists, it may be caused by a more serious issue, and it is recommended to seek the assistance of a professional plumber. Or, read our complete guide on how to fix a leaky faucet.

2: Leaky Plumbing Pipes

Leaky pipes are one of the most common plumbing problems that any homeowner can experience. A variety of plumbing issues can result in leaky pipes, including:

  • Persistent clogs
  • Improper pipe installation
  • Corrosion of pipes
  • Damage to pipe joints
  • Cracks in seals or pipes
  • High water pressure
leaky plumbing pipes problem

How to Fix Your Leaky Pipes?

To this plumbing problem, the appropriate solution will vary depending on the underlying cause of the leak. Suppose the problem is related to persistent clogs or high-water pressure. In that case, adjustments to the plumbing system or the use of specialized equipment may be necessary to clear blockages or regulate water flow. However, if the issue stems from corrosion, joint damage, or cracks in pipes or seals, it may be necessary to replace the affected parts. Seeking assistance from a professional plumber is crucial to accurately diagnose the issue and determine the best course of action to effectively repair the leaky pipes.

So the best solution would be to contact a reliable plumbing company for residential plumbing services.

3: Running Toilet Is Another Common Plumbing Problem

Many homeowners experience running toilets, one of the most common plumbing problems, and neglect it.

Were you aware that a continuously running toilet can result in the waste of as much as 200 gallons of water each day? This amount of water waste is substantial! The causes of running toilets frequently include the following issues:

  • Problems with the refill tube
  • Worn-out flapper seals or flush valves
  • Flapper chains that are incorrectly sized
  • Corrosion of toilet handles
running toilet problem

Solution for Fixing a Running Toilet

To fix this common plumbing issue, the appropriate solution will vary depending on the underlying cause of the issue. Typically, the problem can be resolved by adjusting or replacing one or more of the following components:

⦁ Flapper seal or flush valve: If the flapper seal or flush valve is worn-out or damaged, it may require replacement.

⦁ Refill tube: A running toilet can also result from issues with the refill tube, such as blockages or a poorly positioned float. In such cases, adjusting or replacing the refill tube may be necessary to resolve the problem.

⦁ Flapper chain: An improperly sized flapper chain can prevent the flapper seal from closing correctly, leading to continuous water flow into the toilet bowl. Adjusting or replacing the chain can often solve this issue.

⦁ Toilet handle: Corrosion of the toilet handle can cause the flush plumbing mechanism to malfunction, resulting in a running toilet. Replacing the handle may be necessary.

It is advisable to seek the assistance of a professional plumber to accurately diagnose the problem and determine the best course of action to effectively fix the running toilet.

4: Low Water Pressure in Your Home Plumbing System

Low water pressure is a common plumbing problem that can significantly impact the functionality of your plumbing system.

In many cases, it can indicate underlying plumbing issues, including pipe corrosion, concealed water leaks, drain or sewer clogs, and cracked or obstructed sewer lines.

low water pressure issues in plumbign system

How to Fix Low Water Pressure Plumbing Problems?

The solution for this home plumbing problem will depend on the specific cause of the problem. Here are some general steps you can take:

  1. Check the water pressure regulator: Make sure the pressure regulator is set to the appropriate level.
  2. Check for leaks: Check all visible pipes, valves, and faucets for leaks.
  3. Check for clogs: Clogs can cause low water pressure, so check for blockages in your pipes, faucets, and showerheads.
  4. Call a professional: If you’re unable to identify the cause of the low water pressure, it’s recommended to call a professional plumber to diagnose and fix the issue.

5: Issues With Your Hose Bibb

During the spring and summer seasons, it’s common to experience a leaking hose bibb. This can be a result of the cold winter weather, causing unprotected hose bibbs to crack and leak. Our recommendation is to consider investing in a frost-proof hose bibb, which can minimize the risk of future leaks.

hose bibb issues

6: The Most Common Plumbing Problem: Clogged Drains

Clogged drains are the most common plumbing problems which can be resolved as soon as possible as they can cause disastrous issues in the future, which can cause you a lot of money to fix.

Additionally, if not resolved promptly, drainage problems can pose health risks and lead to severe plumbing issues.

If you’re experiencing slow or clogged drains in your home, the solution will depend on the specific issue. For instance, if the problem is localized to one area, it could be due to a buildup of foreign objects like hair and soap, which can often be resolved through routine drain cleaning. However, if you notice multiple slow or clogged drains, it could indicate a more serious problem with your sewer line. In this case, it’s essential to contact a professional plumber, especially if the issue starts with the lowest drains in your home, to avoid a potential sewage backup.

clogged drains problems

Can You Fix This Plumbing Problem?

You can often fix a clogged drain yourself using a plunger or a drain snake. However, if the clog is particularly stubborn or if you have multiple clogged drains in your home, it’s best to call a professional plumber. Attempting to fix a severe clog yourself can actually make the problem worse or cause damage to your plumbing system. Additionally, some DIY solutions, such as using chemical drain cleaners, can be harmful to your pipes and cause further problems down the line.

Diamond Plumbing can provide the expertise you need to address both localized and more widespread drainage problems.

7: Failure in Your Sump Pump

To identify the cause of sump pump failures, one must consider whether it is a problem with the unit itself or an external issue. Several factors can contribute to sump pump failures, including stuck switches, excessive water accumulation following heavy rain, clogged discharge pipes, incorrect installation, and aging. Sump pumps that are around ten years old are particularly susceptible to failure.

Failure in Sump Pump

8: Problems With Your Water Heaters

The last common plumbing problem in our is having issues with water heaters.

Hot water is an essential component of any home, and when a water heater fails to produce enough or any hot water, it can create a plumbing emergency.

Various issues can cause problems with water heaters, such as:

  • Heating element failures
  • Corrosion or sediment buildup in systems
  • Loose or broken electrical connections
  • Improper installation
  • Using the wrong size or type of system to meet the household’s hot water demands
water heater problems

How to Fix This Plumbing Problem?

  1. Check the power supply: If your water heater is electric, check to make sure it’s receiving power. Check the circuit breaker and reset it if necessary. If it’s a gas heater, make sure the pilot light is lit.
  2. Check the thermostat: If the water temperature isn’t hot enough, adjust the thermostat. If it’s still not heating properly, the thermostat may need to be replaced.
  3. Check the heating element: If the water isn’t heating up at all, the heating element may be faulty and need to be replaced.
  4. Check for leaks: Check for any leaks in the tank or the pipes leading to and from the water heater. If you find any leaks, you may need to replace the affected parts.

If you’re uncomfortable troubleshooting or repairing your water heater, it’s best to contact a licensed plumber to diagnose and fix the problem.